The Arduino board is constructed with the microchip Atmega328. However, to program the chip on an Arduino board, one usually programs it with the Arduino IDE using the Arduino framework. This can be ...

In this project, we're making a cool 4×4×4 LED cube with Arduino Nano. LED cubes, also known as LED Matrix, can light up your room, study space, or Maker area giving it a awesome cool look. Moreover ...

I made this Arduino project that allows to turn ON and OFF LEDs using a cheap IR remote control as a preparation for the next big step: disassemble my girlfriend’s chinese LED lamp and replace its ...

Edit the arduino code LEDmap.ino to suit your LED type, number and pins, refer to fastLED docs if you have trouble with this part The LEDs should start flashing orange to indicate controller is ready ...

In this project we are going to design an 8x8 LED matrix display, for that we are going to interface an 8x8 LED matrix module with Arduino Uno. An 8x8 LED matrix contains 64 LEDs (Light Emitting ...

(D6 of Arduino connected to Din of WS2812B) It is highly recommended to connect a 100nF capacitor across the ‚5v and Gnd‛ connection, and a 100-470 Ohm resistor in series with the ‚Din‛ line of the ...

Software The Arduino IDE or The PlatformIO extension for Visual Studio Code How to Use an RGB LED Module Using the Digital Method This method only works on Arduino boards with a GND pin next to pin 13 ...