Serial Communication using MATLAB GUI For demonstrating the Serial Communication using MATLAB GUI, we will create two graphical buttons using MATLAB to turn on and off the LED connected to the Arduino ...

Software Requirement : We are using the following softwares : The ARDUINO IDE to upload control code to the Arduino to rotate the servo and get distance data from the ultrasonic sensor and also push ...

I made a small project with Hands on study of Arduino micro controller architecture and implemented design of ultrasonic range sensor on Arduino training kit. I also implemented a program on Matlab to ...

This project creates five different lighting patterns including ring counter and Johnson counter by clicking appropriate pushbuttons in the GUI. The blinking speed of LEDs can also be controlled using ...

Testing MATLAB: After installing the support package for MATLAB, we need to check whether it is installed properly or not. 1. Open MATLAB. 2. Connect Arduino to PC. 3. Type the following command in ...

This project presents the implementation of a MATLAB based graphical user interface (GUI) to control the movement of a robotic car. The commands to move the car in forward, reverse, right and left ...

This means that these callback functions must contain all the code you want to run in response to interactions with these controls. The provided MATLAB code file “Robotic_Arm_GUI.m” contains all GUI ...

Once the robotic arm works well with manual commands, you can test it with the MATLAB code by running the “Robotic_Arm_GUI.m” file to open the GUI. Be sure to have the Arduino board’s USB cable ...