This is tutorial number 1 from our series of Arduino tutorials and in this part I will talk about blinking an LED using the one already available on the Arduino Uno board or using an external LED to ...

The purpose of this project is to demonstrate how to use a linked list on an Arduino. If pin 13 is used on an Arduino development board (the LED pin), then no wiring is required to demonstrate this ...

To test our circuit out - and before we start writing a program of our own - we'll load the Blink example. Simply load the Arduino IDE and go to File -> Examples -> Digital -> Blink to see what a very ...

Any serious software project should have good tests and much work has been done to automate that process. One challenging area for testing is low-level devices, such as an Arduino, whose primary ...

That’s stupid! Why use a bunch of parts when you can use an Arduino? However, we rarely see those two comments on the same post. Until now. [ZHut] managed to bring these two worlds together by ...

This is a simple project. It uses an Android device to switch an LED driven by the Arduino. Connectivity is provided by the Bluetooth module inserted in the breadboard. But one look at the UI on the ...

Before opening the Arduino software, wire up the Arduino according to the circuits page using the 8MHz minimalist breadboard circuit but with a 10k pull-up resistor on the reset pin (physical pin 1).